This series plasma cutting machine is developed based on the plasma cutting technology home and abroad. It can equip the American Hypertherm, American Thermadyne, Germany Kemper and domestic plasma sources. There are many different types,such as dry type, dry&underwater type, underwater type and fine plasma, etc. The performance indexes conform to or better than field standards.
Main Technical Parameter
Model
|
QSH30-40
|
QSH30-80II
|
Drive way
|
single drive,24KG/M rail
|
double drive,38KG/M rail
|
Rail span(m)
|
3-4
|
3-8
|
Valid cutting width(m)
|
2.2-3.2
|
2.2-7.2
|
Torch lift stroke(mm)
|
170
|
Rail length
|
according to the requirement of customer
|
Flame cutting speed(mm/min)
|
50-1000(setting as per cutting technology)
|
Plasma cutting speed(mm/min)
|
350-6000
|
Fast return speed(mm/min)
|
6000
|
Flame cutting thickness(mm)
|
6-100(dingle torch),piercing thickness≤80
|
Plasma cutting thickness
|
recommend suitable plasma source according to the requirement of customer
|
Flame cutting material
|
MS
|
Plasma cutting material
|
MS,Aluminum,SS
|
Input power
|
single phase AC220V,50HZ,2KVA
|
Intersection point deviation(mm)
|
≤0.5(800×800 industry standard prescribed figure lineation)
|
Diagonal error(mm)
|
≤0.5(300×300 square lineation)
|
|